Advanced Set
Advanced Set
If no detect string (blank) is entered, the prefix number will be automatically added to the
pre-dial number after the Talk button is pressed. For numbers starting with * /#, or P, the prefix
number will not be added to the Pre-dial number after the Talk button is pressed.
Change recall time
You may need the R (Flash) button to send a Recall signal (also called Timed Break Recall) if
you are connected to a PBX. You should normally leave the Recall Time at its default setting of
Medium
(
30
0ms), as this is the standard recall required in the telephone network, but it can
be
changed to
Short
(
100
ms) or Long (600ms) if your telephone is connected to a PBX that
requires a different recall time.
1. Press the Menu button to enter menu selection.
2. Press the
or
buttons to select ADVANCED SET and then press the OK
button to select.
3. Press the
or
buttons to select RECALL TIME and then press the OK
button to select.
4. Press the
or
buttons to select SHORT, MEDIUM or LONG and then press the OK
button to confirm. The unit will make an audible tone to confirm.
Change the Dial Mode
You should normally leave the dialing mode at its default setting of TONE (DTMF) However,
you can change to PULSE if necessary.
1. Press the Menu button to enter menu selection
2. Press the
or
buttons to select ADVANCED SET and then press the OK button to
select.
3. Press the
or
buttons to select DIAL MODE and then press the OK button to select.
4. Press the
or
buttons to select TONE or PULSE and then press the
OK
button to
confirm. The unit will make an audible tone to confirm.
If PULSE dialing is set, you can press the button to switch to TONE dialing for the rest of that
call.
27