First steps
Placing the handset in the charging cradle
¤
Place the handset in the charging cradle with its
display facing forward
.
The supplied handset is registered with the base at the factory. You do not need to register it. If
you wish to use your handset with a di erent base or use further handsets with your base, you
will have to register them manually,
To charge the batteries, leave the handset in the charging cradle.
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are
fully charged
and
dis-
charged.
Please note
Only place the handset in the charging cradle that is intended for it.
Please note
u
After the
battery charge
and
discharge you may replace your handset in the charg-
ing cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the batteries from
the handset and re-insert them.
¤
Place the handset in the charging cradle for
12
hours.
¤
Then remove the handset
from the charging cradle
and do not replace it until
the batteries are fully dis-
charged.
14 h
8