Page
8
2 Device description P
-
9710 optometer
2.1 Intended use
The P
-
9710 optometers are measurement and examination devices for
optical radiation detectors.
The device can be controlled manually via front panel buttons or via a
RS232 remote interface.
Measurement results are displayed on the integrated display (LCD) or
transmitted via the RS232 remote interface.
Different optical quantities or wavelength bands can be measured by using
different detector heads in combination with the P
-
9710 devices.
The calibration of the optical quantities is stored in the connector plug of
the detector head. This allows using different detector heads with the P
-
9710 device or using the detector heads with different P
-
9710 devices
without the need to change or transfer calibration factors manually.
The P
-
9710 devices have built
-
in batteries that are charged with the sup-
plied plug
-
in power supply. The capacity of the battery allows
5 hours of
operation with display illumination on and 12 hours with illumination off.
2.2 Inspection
Upon
receiving
your device,
please check the
package
and
all its parts for
any possible damages that may have occurred during transportation.
Any transport damages should immediately be reported to
the shipper.
After unpacking, please check to confirm there are no transport damages
or any irregularities with regards to package completeness and correct-
ness. The scope of delivery contains:
one measurement device P
-
9710
one power supply
a factory calibration certificate
this users guide
one hard
-
top casing (optional)
one serial interface cable (optional)
different measurement heads and their calibration certificate (optional)
