Gigabyte W270BUQ User Manual Download

Page: 90 / 242

Drivers & Utilities

4 - 4 Driver Installation

Updating/Reinstalling Individual Drivers

If you wish to update/reinstall individual drivers it
may be necessary to uninstall the original driver.To do
this go to the

Control Panel

in the

Windows OS

and

double-click the

Programs and Features

icon (

Pro-

grams > Uninstall a program

). Click to select the

driver

(if it is not listed see below) and click

Uninstall

and then follow the on screen prompts (it may be nec-
essary to restart the computer). Reinstall the driver as
outlined in this chapter.

If the driver is not listed in the

Programs and Fea-

tures

menu:

Click

Start

, and click

Control Panel

(or point to

Settings

and click

Control Panel

Double-click

Device Manager

(

Hardware and

Sound > Device Manager

Double-click the

device

you wish to update/reinstall

the driver for (you may need to click “+” to expand
the selection).

Click

Driver

(tab) and click the

Update Driver

Uninstall

button and follow the on screen prompts.

User Account Control

If a

User Account Control

prompt appears as part of

the driver installation procedure, click

Continue

Allow

, and follow the installation procedure as direct-

ed.

Windows Security Message

If you receive a

Windows

security message as part of

the driver installation process. Just click

“Install this

driver software anyway”

“Install”

to continue the

installation procedure.

You will receive this message in cases where the driv-
er has been released after the version of

Windows

you

are currently using. All the drivers provided will have
already received certification for

Windows

Summary of Contents for W270BUQ



















































































































































































































































Search results

Summary of Contents for W270BUQ

Reviews:

Related manuals for W270BUQ

Brands by name

Popular brands

Gigabyte W270BUQ, User Manual

Search results

Summary of Contents for W270BUQ

Reviews:

Related manuals for W270BUQ

Brands by name

Popular brands