Gigabyte TO22-Z61, User Manual

Page: 22 / 141

System Hardware Installation - 22 -
3-2-1 Installing the Hard Disk Drive on the Middle Tray (TO22-Z62 Only)
Read the following guidelines before you begin to install the Hard disk drive:
• Take note of the drive tray orientation before sliding it out.
• The tray will not fit back into the bay if inserted incorrectly.
• Make sure that the HDD is connected to the HDD connector on the backplane.
Follow these instructions to install the Hard disk drive:
1. Remove the System Cover. See Section 3-3 Removing System Cover.
2. Press the release latch.
3. Move toward to remove the HDD tray.
4. Pull apart the hdd tray latch and insert hard disk at a 45 degree.
5. Pull apart the other side of latch
6. Push down the and hard disk into the tray.
1
2
3
5
6
4
7