Gigabyte R271-Z31 Service Manual Download Page 110

Page: 110 / 142

BIOS Setup

- 110 -

5-6 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] for configuration of advanced items.

Summary of Contents for R271-Z31















































































































































Search results

Summary of Contents for R271-Z31

Reviews:

Related manuals for R271-Z31

Brands by name

Popular brands

Gigabyte R271-Z31, Service Manual

Search results

Summary of Contents for R271-Z31

Reviews:

Related manuals for R271-Z31

Brands by name

Popular brands