Gigabyte R263-Z33, User Manual

Page: 107 / 161

BIOS Setup
- 107 -
Parameter Description
ECC Configuration
(contiuned)
Š
DRAM ECC Enable
– Enable/Disable DRAM ECC. When set to Auto, it will set ECC
to enable.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto .
Š
DRAM UECC Retry
– Enable/Disable DRAM UECC Retry.
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled .
Š
Max DRAM UECC Error Replay (Note)
– Default setting is 8 .
Š
Memory Clear
– Options available: Auto, Enabled, Disabled. Default setting is
Auto .
Š
Address XDR after ECC
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled .
DRAM Scrubbers
Press [Enter] to configure advanced items.
Š
DRAM ECS Mode
– Options available: Auto, AutoECS, ManualECS, DisableECS.
Default setting is Auto .
Š
DRAM Redirect Scrubber Enable
– Options available: Auto, Enabled, Disabled. Default setting is
Auto .
Š
DRAM Scrub Redirection Limit
– Options available: Auto, 8 Scrubs, 4 Scrubs, 2 Scrubs, 1 Scrub.
Default setting is Auto .
Š
DRAM Scrub Time
– Options available: Disabled, 1 hour, 4 hours, 6 hours, 8 hours,
12 hours, 16 hours, 24 hours, 48 hours. Default setting is 24
Hours .
Š
DRAM Error Threshold Count
– Options available: Auto, ETC_4, ETC_16, ETC_64, ETC_256,
ETC_1024, ETC_4096. Default setting is Auto .
Š
DRAM ECS Count Mode
– Options available: Auto, Row Count Mode, Code Word Count
Mode. Default setting is Auto .
Š
DRAM AutoEcs during Self Refresh
– Options available: Auto, AutoEcs Disabled, AutoEcs Enabled.
Default setting is Auto .
Š
DRAM ECS WriteBack Suppression
– Options available: Auto, Enable, Disable. Default setting is
Auto .
(Note) This item available when DRAM UECC Retry is set to Enabled .