Gigabyte R161-R12, Service Manual

Page: 64 / 123

BIOS Setup - 64 -
5-3-1 PCH-IO Configuration
Parameter
Description
PCH-IO Configuration
SATA And RST
Configuration
Press [Enter] to configure advanced items.
Š
SATA Controller
– Enable/Disable SATA device.
– Options available: Enabled/Disabled. Default setting is Enabled .
Š
SATA Mode Selection
– Configures on chip SATA type.
– AHCI Mode: the SATA controller enables its AHCI functionality.
Then the RAID function is disabled and cannot be access the RAID
setup utility at boot time.
– Intel RST Premium: the SATA controller enables both its RAID and
AHCI functions. You will be allowed to access the RAID setup utility
at boot time.
– Options available: AHCI/Intel RST Premium. Default setting is
AHCI .
Š
SATA Port 0/1/2/3/4/5/6/7
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
Š
Port 0/1/2/3/4/5/6/7
– Enable/Disable Port 0/1/2/3/4/5/6/7 device.
– Options available: Enabled/Disabled. Default setting is Enabled .
Š
Hot Plug (for Port 0/1/2/3/4/5/6/7)
– Enable/Disable SATA ports Hot Plug support.
– Options available: Enabled/Disabled. Default setting is Enabled