Gigabyte Q2542C, User Manual

Page: 7 / 41

English
VI V
Regulatory Notices
For CB:
● Only use batteries designed for this computer. The wrong battery
type may explode, leak or damage the computer.
● Do not remove any batteries from the computer while it is powered
on.
● Do not continue to use a battery that has been dropped, or that
appears damaged (e.g. bent or twisted) in any way. Even if the
computer continues to work with a damaged battery in place, it may
cause circuit damage, which may possibly result in fire.
● Recharge the batteries using the notebook’s system. Incorrect
recharging may make the battery explode.
● Do not try to repair a battery pack. Refer any battery pack repair
or replacement to your service representative or qualified service
personnel.
● Keep children away from, and promptly dispose of a damaged
battery. Always dispose of batteries carefully. Batteries may explode
or leak if exposed to fire, or improperly handled or discarded.
● Keep the battery away from metal appliances.
● Affix tape to the battery contacts before disposing of the battery.
● Do not touch the battery contacts with your hands or metal objects.
RF Exposure:
This equipment must be installed and operated in accordance with
provided instructions and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
CE Notice (European Union)
This symbol indicates this Booktop Q2542 notebook complies with
the EMC Directive and the European Union’s Low Voltage Directive. This
symbol also indicates that Q2542 meets the following technical
standards:
● EN 55022 — “Limitations and Methods of Measurement for the Radio
Interferences of Information Technology Equipment.”
● EN 55024 — “Information technology equipment - Immunity
characteristics - Limits and methods of measurement.”
● EN 61000-3-2 — “Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 2: Limits on the harmonic current emissions
(Equipment input current up to and including 16 A per phase).”
● EN 61000-3-3 — “Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 3: Limits on the voltage fluctuations and flicker in
low-voltage power supply systems for equipment with rate current up
to and including 16 A.”
NOTE:
EN 55022 emissions requirements provide for two classifications
● Class A governs commercial use
● Class B is governs residential use