manualshive.com logo in svg

Gigabyte GN-GSV2401M, User Manual

Share
Download
Gigabyte GN-GSV2401M User Manual Download Page 60

55 

3.3.1 Main Menu 

 
The main menu allows you access to all the GN-GSV2401M settings. To access  
each setting press the “Tab” key to select the desired setting and then press 
“Enter”. To return to the previous selection press “B kSpc” key.

 

 
 

 

 

Description of each Main Menu function: 

 

Switch Static Configuration 

The Switch Static Configuration menu gives you access to  Port Configuration, 
Trunk Configuration, VLAN Configuration, Misc Configuration, Administration 
Configuration, Port Mirroring Configuration, Priority Configuration and MAC 
Address Configuration. 
 

Protocol Related Configuration 

The Protocol Related Configuration menu gives you configure the protocol 
functions, including STP, SNMP, GVRP, IGMP, LACP and 802.1x. 
 

Status and Counters 

The Status and Counters will show you the current status and statistics 
information of the switch. 
 

Reboot Switch 

The Reboot Switch function lets you reboot the Gigabyte GN-GSV2401M. 

Summary of Contents for GN-GSV2401M





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands