manualshive.com logo in svg

Gigabyte GN-GSV2401M, User Manual

Share
Download
Gigabyte GN-GSV2401M User Manual Download Page 131

126 

Limited Warranty 

 
1-Year Warranty 

Gigabyte warrants to the original consumer/purchaser that the adapter product 
free from defects in material and workmanship for no limited time from the 
original manufactory shipment date. This warranty does not cover the product 
if it is damaged in the process of being installed or improperly used.   
 
Gigabyte may replace or repair the adapter product with either new or 
reconditioned parts. Repaired or replaced adapter products will be returned to 
you at the same revision level as received or higher at Gigabyte’s option. 
Gigabyte reverses the right to replace discounted adapter products with an 
equivalent generation adapter product. 
 

 

KEEP THIS STUB FOR YOUR PURCHASING RECORD 

 

Customer: 

 

Phone No: 

 

Address: 

 

Email: 

 

Model: 

 

Serial: 

 

Date of Purchase: 

 

Place of Purchase: 

 

From Whom: 

 

Distributor:   

 
 

 

 

Customer Satisfaction 

 
 
 

 

 

 
 
 

GIGA-BYTE TECHNOLOGY CO., LTD. 

No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R.O.C. 

Tel: 886-2-89124888 

Fax:886-2-89124007 

http://www.gigabyte.com.tw 

 

Technical Support 

E-mail: 

[email protected]

 

TEL: 886-2-89124888  

 

 

Summary of Contents for GN-GSV2401M





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands