Gigabyte GA-Z77X-UP7 User Manual Download Page 56

Page: 56 / 128

BIOS Setup

- 56 -

Administrator Password

Allows you to configure an administrator password. Press <Enter> on this item, type the password, and

then press <Enter>. You will be requested to confirm the password. Type the password again and press

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

User Password

Allows you to configure a user password. Press <Enter> on this item, type the password, and then press

<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

To cancel the password, press <Enter> on the password item and when requested for the password, enter the

correct one first. When prompted for a new password, press <Enter> without entering any password. Press

<Enter> again when prompted to confirm.

Legacy only

Enables legacy Option ROM only.

UEFI only

Enables UEFI Option ROM only.

Legacy First Enables legacy option ROM first.

UEFI First

Enables UEFI option ROM first.

This item is configurable only when

CSM Support

is set to

Always

Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled

Disables option ROM.

Legacy only

Enables legacy Option ROM only. (Default)

UEFI only

Enables UEFI Option ROM only.

Legacy First Enables legacy option ROM first.

UEFI First

Enables UEFI option ROM first.

This item is configurable only when

CSM Support

is set to Always.

Display Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller.

Disabled

Disables option ROM.

Legacy only

Enables legacy Option ROM only. (Default)

UEFI only

Enables UEFI Option ROM only.

Legacy First Enables legacy option ROM first.

UEFI First

Enables UEFI option ROM first.

This item is configurable only when

CSM Support

is set to Always.

Other PCI Device ROM Priority

Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other

than the LAN, storage device, and graphics controllers.

Legacy OpROM Enables legacy Option ROM only.

UEFI OpROM Enables UEFI Option ROM only. (Default)

Network stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disable Link)

IPv4 PXE Support

Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled.

IPv6 PXE Support

Enables or disables IPv6 PXE Support. This item is configurable only when Network stack is enabled.

Summary of Contents for GA-Z77X-UP7

































































































































Search results

Summary of Contents for GA-Z77X-UP7

Reviews:

Related manuals for GA-Z77X-UP7

Brands by name

Popular brands

Gigabyte GA-Z77X-UP7, User Manual

Search results

Summary of Contents for GA-Z77X-UP7

Reviews:

Related manuals for GA-Z77X-UP7

Brands by name

Popular brands