Gigabyte GA-8S648FXM User Manual Download Page 45

Page: 45 / 96

- 41 -

BIOS Setup

English

Onboard Serial Port 1

Disabled

Disable onboard Serial port 1.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8, using IRQ3.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8, using IRQ4.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8, using IRQ3.

Auto

BIOS will automatically setup the port 1 address.

Onboard Serial Port 2

Disabled

Disable onboard Serial port 2.

3F8/IRQ4

Enable onboard Serial port 2 and address is 3F8, using IRQ4.

2F8/IRQ3

Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value)

3E8/IRQ4

Enable onboard Serial port 2 and address is 3E8, using IRQ4.

2E8/IRQ3

Enable onboard Serial port 2 and address is 2E8, using IRQ3.

Auto

BIOS will automatically setup the port 2 address.

Onboard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378, using IRQ7. (Default Value)

278/IRQ5

Enable onboard LPT port and address is 278, using IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC, using IRQ7.

Parallel Port Mode

This feature allows you to connect with an advanced printer via the port mode it supports.

SPP

Using Parallel port as Standard Parallel Port.

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port. (Default Value)

ECP+EPP

Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.

Set ECP Mode Use DMA to 1.

Set ECP Mode Use DMA to 3. (Default Value)

Summary of Contents for GA-8S648FXM

































































































Search results

Summary of Contents for GA-8S648FXM

Reviews:

Related manuals for GA-8S648FXM

Brands by name

Popular brands

Gigabyte GA-8S648FXM, User Manual

Search results

Summary of Contents for GA-8S648FXM

Reviews:

Related manuals for GA-8S648FXM

Brands by name

Popular brands