manualshive.com logo in svg

Gigabyte GA-8S648FXM, User Manual

Share
Download
Gigabyte GA-8S648FXM User Manual Download Page 81

Appendix

- 77 -

English

Revision History

Chapter 5  Appendix

Pictures below are shown in Windows XP (Driver CD ver 2.22)

Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the
driver CD-title will auto start and show the installation guide. If not, please double click
the CD-ROM device icon in "My computer", and execute the setup.exe.

INSTALL CHIPSET DRIVER

Install Drivers

This page shows the drivers that need to be installed for the system. Click each item to install the

driver manually or switch to the 

 to install the drivers automatically.

The "Xpress Install" uses the"Click and Forget" technology to install the drivers automatically. Just
select the drivers you want then click the "GO" button. The 

 will finish the installation for you

automatically.

We recommend that you install all components in the list.

Massage: Some device drivers will restart
your system automatically. After restarting
your system the "Xpress Install" will
continue to install other drivers.

Summary of Contents for GA-8S648FXM

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands