Gigabyte GA-6LXSV, User Manual, Page: 68 / 97

BIOS Setup - 68 -
PEG0 De-emphasis Control
PEG0:Configure the De-emphasis control on PEG.
Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB .
PEG1 De-emphasis Control
PEG1:Configure the De-emphasis control on PEG.
Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB .
PEG2 De-emphasis Control
PEG2:Configure the De-emphasis control on PEG.
Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB .
PEG0 - ASPM
Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.
Options available: Enabled/Disabled. Default setting is Disabled .
PEG1 - ASPM
Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.
Options available: Enabled/Disabled. Default setting is Disabled .
PEG2 - ASPM
Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.
Options available: Enabled/Disabled. Default setting is Disabled .
PEG Sampler Calibrate
Enable or disable PEG Sampler Calibrate\nAuto means Disabled for SNB MB/DT, Enabled for IVB A0
B0.
Options available: Enabled/Disabled. Default setting is Disabled .
Swing Control
Perform PEG Swing Control, on IVB C0 and Later.
Options available: Reduced/Half/Full. Default setting is Full .
PEG Gen3 Equalization
Perform PEG Gen3 Equalization steps.
Options available: Enabled/Disabled. Default setting is Enabled .
Gen3 Eq Phase 2
Perform PEG Gen3 Equalization Phase 2.
Options available: Enabled/Disabled. Default setting is Enabled .
Gen3 Eq Preset Search
Perform PEG Gen3 Preset Search algorithm, on IVB C0 and Later.
Options available: Enabled/Disabled. Default setting is Enabled .
PEG RxCEM LoopBack Mode
Options available: Enabled/Disabled. Default setting is Disabled .