manualshive.com logo in svg

Gigabyte GA-6LXSV, User Manual

Share
Download
Gigabyte GA-6LXSV User Manual Download Page 52

BIOS Setup

- 52 -

  HDD Unlock

 

When this item is enabled, the HDD password unlock in the OS is enabled.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  LED Locate

 

When this item is enabled, the LED/SGPIO hardware is attached and ping to locate feature is enabled 

on the OS.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  IRRT Only on eSATA

 

When this item is enabled, only IRRT volumes can span internal and eSATA drives. If disabled, then any 

RAID volue can span internal and eSATA drives

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  Smart Response Technlogy

 

Enable/Disable Intel Smart Response Technlogy.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  OROM UI Delay

 

Options available: 2 Seconds/4 Seconds/6 Seconds/8 Seconds. Default setting is

 2 Seconds

.

Summary of Contents for GA-6LXSV


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands