Gigabyte GA-6LXSV User Manual Download Page 51

Page: 51 / 97

- 51 -

BIOS Setup

2-2-5-1 Software Feature Mask Configuration

RAID 0

Enable/Disable RAID 0 feature.

Options available: Enabled/Disabled. Default setting is

Enabled

RAID 1

Enable/Disable RAID 1 feature.

Options available: Enabled/Disabled. Default setting is

Enabled

RAID 10

Enable/Disable RAID 10 feature.

Options available: Enabled/Disabled. Default setting is

Enabled

RAID 5

Enable/Disable RAID 5 feature.

Options available: Enabled/Disabled. Default setting is

Enabled

Intel Rapid Recovery Technology

Enable/Disable the Intel Rapid Start Technology (IRSTe) funciton. The IRSTe enables your system to get
up and running faster from even the deepest sleep, saving time and power consumption.

Option available: Enabled/Disabled. Default setting is

Disabled

Options available: Enabled/Disabled. Default setting is

Enabled

OROM UI and BANNER

Enable/Disable OROM UI and BANNER feature.

Options available: Enabled/Disabled. Default setting is

Enabled

Summary of Contents for GA-6LXSV


































































































Search results

Summary of Contents for GA-6LXSV

Reviews:

Related manuals for GA-6LXSV

Brands by name

Popular brands

Gigabyte GA-6LXSV, User Manual

Search results

Summary of Contents for GA-6LXSV

Reviews:

Related manuals for GA-6LXSV

Brands by name

Popular brands