manualshive.com logo in svg

Gigabyte G492-ZD0, User Manual, Page: 99 / 152

Share
Download
Gigabyte G492-ZD0 User Manual Download Page 99

- 39 -

BIOS Setup

5-3-4  NBIO Common Options

Parameter

Description

NBIO Common Options

IOMMU

Enable/Disable the IOMMU function.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

PCIe ARI Support

Enable/Disable Alternative Routng-ID Interpretation.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

SMU Common Options

Press [Enter] for configuration of advanced items.

NBIO RAS Common 
Options

Press [Enter] for configuration of advanced items.

Enable AER Cap

Enable/Disable Advanced Error Reporting Capability.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Early Link Speed

Configures Early Link Speed.

Options available: Auto, Gen1, Gen2. Default setting is 

Auto

.

Summary of Contents for G492-ZD0

























































































































































Reviews:

No comments