manualshive.com logo in svg

Gigabyte G492-ZD0, User Manual, Page: 62 / 152

Share
Download
Gigabyte G492-ZD0 User Manual Download Page 62

BIOS Setup

- 62 -

5-2-11 

Network Stack Configuration

(Note)  This item appears when 

Network Stack

 is set to 

Enabled

.

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

IPSEC Certificate

(Note)

Enable/Disable the IPSEC Certificate feature.

Options available: Enabled/Disabled. Default setting is 

Enabled

.

PXE boot wait time

(Note)

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for G492-ZD0

























































































































































Reviews:

No comments