manualshive.com logo in svg

Gigabyte G492-ZD0, User Manual, Page: 91 / 152

Share
Download
Gigabyte G492-ZD0 User Manual Download Page 91

- 39 -

BIOS Setup

5-3-3-1-4 Common RAS

Parameter

Description

Common RAS

Data Poisoning

Enable/Disable the Data Poisoning function.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

DRAM Post Package Repair

Enable/Disable the DRAM Post Package Repair function.
Options available: Enabled/Disabled. Default setting is 

Auto

.

RCD Parity

Enable/Disable the RCD Parity function.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

DRAM Address Command Parity 
Retry

Enable/Disable the DRAM Address Command Parity Retry function.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Max Parity Error Replay

Configures the Max Parity Error Replay. (0~0x3

f)

Default setting is 

8

.

Please note that this item is configurable when DRAM Address 

Command Parity Retry is set to Enabled.

Write CRC Enable

Enable/Disable the Write CRC function.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

DRAM Write CRC Enable and Retry 
Limit

Enable/Disable DRAM Write CRC Enable and Retry Limit.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Max Write CRC Error Replay

Configures the Max Write CRC Error Replay. (0~0x3

f)

Default setting is 

8

.

Please note that this item is configurable when DRAM Write CRC 

Enable and Retry Limit is set to Enabled.

Summary of Contents for G492-ZD0

























































































































































Reviews:

No comments