manualshive.com logo in svg

Gigabyte G492-ZD0, User Manual, Page: 122 / 152

Share
Download
Gigabyte G492-ZD0 User Manual Download Page 122

BIOS Setup

- 122 -

5-7  Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up 
access passwords. 

There are two types of passwords that you can set:

• 

Administrator Password

 

 

Entering this password will allow the user to access and change all settings in the Setup Utility. 

• 

User Password

 

 

Entering this password will restrict a user’s access to the Setup menus. To enable or disable  

 

 

this field, a Administrator Password must first be set. A user can only access and modify the  

 

 

System Time, System Date, and Set User Password fields.

Parameter

Description

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] to configure advanced items.

Summary of Contents for G492-ZD0

























































































































































Reviews:

No comments