manualshive.com logo in svg

Gigabyte G492-Z52, User Manual, Page: 87 / 137

Share
Download
Gigabyte G492-Z52 User Manual Download Page 87

- 87 -

BIOS Setup

5-3-2  DF Common Options

Parameter

Description

DF Common Options
Scrubber

Press [Enter] for configuration of advanced items.

Memory Addressing

Press [Enter] for configuration of advanced items.

ACPI

Press [Enter] for configuration of advanced items.

Link

Press [Enter] for configuration of advanced items.

Disable DF to external IP

sync flood propagation

Enable/Disable SyncFlood to UMC & downstream slaves.

Options available: Auto, Sync flood disabled, Sync flood enabled. 

Default setting is 

Auto

.

Disable DF sync flood 

propagation

Enable/Disable DF Sync Flood propagation.

Options available: Auto, Sync flood disabled, Sync flood enabled. 

Default setting is 

Auto

.

Freeze DF module queues on 
error

Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

CC6 memory region encryption

Controls whether or not the CC6 save/restor memory is encrypted.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

System probe filter

Enable/Disable System probe filter.

Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Memory Clear

Enable/Disable the Memory Clear feature.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

PSP error injection support

Enable/Disable PSP error injection support.
Options available: False, True. Default setting is 

False

.

Summary of Contents for G492-Z52










































































































































Reviews:

No comments