manualshive.com logo in svg

Gigabyte G492-Z52, User Manual, Page: 125 / 137

Share
Download
Gigabyte G492-Z52 User Manual Download Page 125

- 125 -

BIOS Setup

5-6  Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Default setting is 

Enabled

.

FRB-2 Timer 
timeout

Configures the FRB2 Timer timeout.

Options available: 3 minutes, 4 minutes, 5 minutes, 6 minutes. Default setting is 

6 

minutes

.

FRB-2 Timer Policy

Configures the FRB2 Timer policy.

Options available: Do Nothing, Reset, Power Down. Default setting is 

Do Nothing

.

OS Watchdog 
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

OS Wtd Timer 
Timeout

(Note1)

Configures OS Watchdog Timer.

Options available: 5 minutes, 10 minutes, 15 minutes, 20 minutes. Default setting is 

10 minutes

.

OS Wtd Timer 
Policy

(Note1)

Configure OS Watchdog Timer Policy.

Options available: Reset, Do Nothing, Power Down. Default setting is 

Reset

.

Wait BMC Ready

Post wait BMC ready and reboot system.
Options available: Disabled, 2 minutes, 4 minutes, 6 minutes. Default setting is 

2 

minutes

.

(Note1)  This item 

is configurable when

 OS Watchdog Timer

 is set to 

Enabled

.

Summary of Contents for G492-Z52










































































































































Reviews:

No comments