manualshive.com logo in svg

Gigabyte G262-ZR0, User Manual

Share
Download
Gigabyte G262-ZR0 User Manual Download Page 106

BIOS Setup

- 106 -

5-3-4-2 NBIO RAS Common Options

Parameter

Description

NBIO RAS Common Options
NBIO RAS Global Control

Options available: Auto/Manual. Default setting is 

Auto

.

NBIO RAS Control

Options available: Disabled, MCA, Legacy. Default setting is 

MCA

.

Egress Poison Serverity High

Configures the Egress Poison High Serverity. Each bit set to 1 enables 

High serverity on the associated IOHC egress port. A bit of 0 indicates 
LOW serverity.

Egress Poison Serverity Low 

Configures the Egress Poison Low Serverity. Each bit set to 1 enables 

High serverity on the associated IOHC egress port. A bit of 0 indicates 
LOW serverity.

NBIO SyncFlood Generation

The value may be used to mask SyncFlood caused by NBIO RAS options.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

NBIO SyncFlood Reporting

The value may be used to enanle SyncFlood reporting to APML.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

Egress Poison Mask High

Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0, 
errors trigger response actions.

Egress Poison Mask Low

Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0, 
errors trigger response actions.

Summary of Contents for G262-ZR0




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands