- 53 -
BIOS Setup
Parameter
Description
CPU Common Options
Performance
Press [Enter] for configuration of advanced items.
Prefetcher settings
Press [Enter] for configuration of advanced items.
Core Watchdog
Press [Enter] for configuration of advanced items.
RedirectForReturnDis
From a workaround for GCC/C000005 issue for XV Core on CZ A0,
setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14
[DecfgNoRdrctForReturns] to 1.
Options available: Auto
,
1, 0. Default setting is
Auto
.
Platform First Error Handling
Enable/Disable PFEH, cloak individual banks, and mask deferred error
interrupts from each bank.
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Core Performance Boost
Enable/Disable the Core Performance Boost function.
Options available: Auto/Disabled. Default setting is
Auto
.
Global C-State Control
Controls the IO based C-state generation and DF C-states.
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Power Supply Idle Control
Configures the Power Supply Idle Control.
Options available: Auto, Low Current Idle, Typical Current Idle. Default
setting is
Auto
.
SEV ASID Count
Specifies the maximum valid ASID, which affects the maximum system
physical address space.
Options available: Auto, 253 ASIDs, 509 ASIDs. Default setting is
Auto
.
SEV-ES ASID Space Limit
Control
Space limit control for SEV-ES ASIDs.
Options available: Auto/Manual. Default setting is
Auto
.
Streaming Stores Control
Enable/Disable the Streaming Stores functionality.
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Local APIC Mode
Sets the Local APIC Mode.
Options available: Auto, xAPIC, x2APIC. Default setting is
Auto
.
ACPI_CST C1 Decaration
Determines whether or not to declare the C1 state to the OS..
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
MCA error thresh enable
Enable MCA error thresholding.
Options available: Auto, False, True. Default setting is
Auto
.
SMU and PSP Debug Mode
When this option is enabled, specific uncorrected errors detected by the
PSP FW or SMU FW will hand and not reset the system.
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Xtrig7 Workaround
Options available: Auto, No Workaround, Bronze Workaround, Sliver
Workaround. Default setting is
Auto
.
Summary of Contents for G262-ZO0
