- 97 -
BIOS Setup
5-6 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.
Parameter
Description
Boot Configuration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
means indefinite waiting.
Press the numeric keys to input the desired values.
Bootup NumLock State
Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is
On
.
Quiet Boot
Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is
Enabled
.
Setup Flash
Press [Enter] to run setup flash.
Dump full Setup Data
Press [Enter] to dump full setup data to file.
Dump non-default Setup Data
Press [Enter] to dump non-default setup data to file.
Restore Setup Data
Press [Enter] to restore setup data from file.
Boot mode select
Selects the boot mode.
Options available: LEGACY, UEFI. Default setting is
UEFI
.
Summary of Contents for G262-IR0
