Gigabyte G262-IR0 User Manual Download Page 84

Page: 84 / 99

BIOS Setup

- 86 -

5-4 Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled, Disabled. Default setting is

Disabled

FRB-2 Timer

(Note1)

timeout

Configures the FRB2 Timer timeout. The value is between 1 to 30 minutes.

Default setting is

6 minutes

FRB-2 Timer
Policy

(Note1)

Configures the FRB2 Timer policy.

Options available: Do Nothing, Reset, Power Down, Power Cycle.
Default setting is

Do Nothing

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled, Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

(Note2)

Configures OS Watchdog Timer. The value is between 1 to 30 minutes.

Default setting is

10 minutes

OS Wtd Timer
Policy

(Note2)

Configure OS Watchdog Timer Policy.

Options available: Reset, Do Nothing, Power Down, Power Cycle.
Default setting is

Reset

Wait BMC Ready

POST wait BMC ready and reboot system.
Options available: Disabled, 2 minutes, 4 minutes, 6 minutes.
Default setting is

2 minutes

(Note1) This item

is configurable when

FRB-2 Timer

is set to

Enabled

(Note2) This item

is configurable when

OS Watchdog Timer

is set to

Enabled

Summary of Contents for G262-IR0




































































































Search results

Summary of Contents for G262-IR0

Reviews:

Related manuals for G262-IR0

Brands by name

Popular brands

Gigabyte G262-IR0, User Manual

Search results

Summary of Contents for G262-IR0

Reviews:

Related manuals for G262-IR0

Brands by name

Popular brands