Gigabyte G210-H4G, Service Manual

Page: 34 / 98

- 34 - Hardware Installation
4-2 Jumper Setting
No. Jumper Code Jumper Setting
1.
SATA_DOM4
(SATA port 4 DOM Jumpers)
CAUTION!
If the SATA DOM power is supplied by the
motherboard, set the jumper to pin 1-2.
If the SATA DOM power is supplied by external
power, set the jumper to pin 2-3.
If a SATA type hard drive is connected to the motherboard,
please ensure the jumper is closed and set to 2-3 pins (Default
setting), in order to reduce any risk of hard disk damage.
Pin No. Definition
1 P5V
2 SATA_DOM4
3 GND
2.
ME_UPDATE
(ME Recover Jumpers) 1-2 Close: ME recovery mode.
2-3 Close: Normal operation (Default setting)
3.
BIOSRCVR
(BIOS Recovery Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
4.
CLR_CMOS
(Clearing CMOS Jumper) 1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
5.
CFG5
(PCIE_1 bandwidth
switch Jumper) 1-2 Close: PCIE_1 operates in x16 bandwidth. (Default setting)
2-3 Close: PCIE_1 operates in x8 bandwidth.
3
4
5
2
1