Gigabyte G210-H4G Service Manual Download Page 49

Page: 49 / 98

BIOS Setup

- 49 -

Turbo Mode

When this item is enabled, tje processor will automatically ramp up the clock speed of 1-2 of its

processing cores to improve its performance.

When this item is disabled, the processor will not overclock any of its core.

Options available: Enabled/Disabled. Default setting is

Enabled

Energy Performance

Energy Performance Bias is Intel CPU function.

The larger value in MSR_ENERGY_PERFORMANCE_BIAS register,

CPU will save more power but lose more performance.

Note:

This register will be changed by OS too if OS support it like Windows 2008 or newer Linux.

Options available:

Performance : Write value 0 into MSR_ENERGY_PERFORMANCE_BIAS

Balanced Performance: Write value 7 into MSR_ENERGY_PERFORMANCE_BIAS

Balanced Energy: Write value 11 into MSR_ENERGY_PERFORMANCE_BIAS

Energy Efficient: Write value 15 into MSR_ENERGY_PERFORMANCE_BIAS

Default setting is

Performance

Platform power limit lock

Options available: Enabled/Disabled. Default setting is

Enabled

CPU C State

Enable/Disable CPU C State feature.

Options available: Enabled/Disabled. Default setting is

Enabled

Enhanced C1 state

Enable/Disable C1E State feature.

Options available: Enabled/Disabled. Default setting is

Enabled

CPU C3/C6 Report

(Note)

Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled,

the CPU core frequency and voltage will be reduced during system halt state to decrease power

consumption. The C3/C6 state is a more enhanced power-saving state than C1.

Options available: Enabled/Disabled. Default setting is

Enabled

CPU C7 Report

(Note)

Allows you to enable or disable the CPU C7 (ACPI C3) report.

Options available: Disabled/CPU C7/CPU C7s. Default setting is

CPU C7s

Package C state demotion

Configure state for the C-State package demotion.

Options available: Enabled/Disabled. Default setting is

Disabled

Package C state undemotion

Configure state for the C-State package undemotion.

Options available: Enabled/Disabled. Default setting is

Disabled

CFG lock

Options available: Enabled/Disabled. Default setting is

Enabled

Summary of Contents for G210-H4G



































































































Search results

Summary of Contents for G210-H4G

Reviews:

Related manuals for G210-H4G

Brands by name

Popular brands

Gigabyte G210-H4G, Service Manual

Search results

Summary of Contents for G210-H4G

Reviews:

Related manuals for G210-H4G

Brands by name

Popular brands