- 8 -
enceIn which case the user may be required to take adequate measures
.
This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interfer-
ence when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may
cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely
to cause harmful interference in which case the user will berequired to correct the interference at his own ex-
pense.Properly shielded and grounded cables and connectors must be used in order to meet FCC emission-
limits. Neither the provider nor the manufacturer are responsible for any radio or television interferencecaused
by using other than recommended cables and connectors or by unauthorized changes ormodifications to this
equipment. Unauthorized changes or modifications could void the user's authority tooperate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired opera-
tion.
FCC part 68 (applicable to products fitted with USA modems)
The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, amongother
information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment.You
must, upon request, provide this information to your telephone company.If your telephone equipment causes
harm to the telephone network, the Telephone Company maydiscontinue your service temporarily. If possible,
they will notify in advance. But, if advance notice is notpractical, you will be notified as soon as possible. You
will be informed of your right to file a complaint with the FCC.Your telephone company may make changes in
its facilities, equipment, operations, or procedures thatcould affect proper operation of your equipment. If they
do, you will be notified in advance to give you anopportunity to maintain uninterrupted telephone service.The
FCC prohibits this equipment to be connected to party lines or coin-telephone service.The FCC also requires
the transmitter of a FAX transmission be properly identified (per FCC Rules Part68, Sec. 68.381 (c) (3)./ for
Canadian users only
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class A limits for radio noise emissions from digitalapparatus as
set out in the radio interference regulations of Industry Canada.Le present appareil numerique n'emet pas
de bruits radioelectriques depassant les limites applicables auxappareils numeriques de Classe A prescrites
dans le reglement sur le brouillage radioelectrique edicte parIndustrie Canada.
DOC notice (for products fitted with an Industry Canada-compliant modem)
The Canadian Department of Communications label identifies certified equipment. This certificationmeans
that the equipment meets certain telecommunications network protective, operational and safetyrequire
-
ments. The Department does not guarantee the equipment will operate to the user satisfaction.Before install-
ing this equipment, users ensure that it is permissible to be connected to the facilities of thelocal Telecom-
munications Company. The equipment must also be installed using an acceptable methodof connection. The
customer should be aware that compliance with the above conditions might not preventdegradation of service
in some situations.Repairs to certified equipment should be made by an authorized Canadian maintenance
Summary of Contents for G210-H4G
