manualshive.com logo in svg

Gigabyte G152-Z12, User Manual, Page: 129 / 140

Share
Download
Gigabyte G152-Z12 User Manual Download Page 129

BIOS Setup

- 129 -

5-6-3 

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Selects to configure LAN channel parameters statically or dynamically 

(DHCP). Do nothing option will not modify any BMC network parameters 
during BIOS phase.

Options available: Unspecified, Static, DynamicBmcDhcp. Default setting 

is 

DynamicBmcDhcp

.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 
192.168.000.001.

Router IP address

Displays the Router IP Address information. 

Station MAC address

Displays the MAC Address information. 

VLAN Support

Set to BMC enabled/diisabled VLAN.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Real-time get BMC network 
address

Press [Enter] will set LAN mode and Address source and then get IP, 
Subnet, Gateway and MAC address.

Summary of Contents for G152-Z12













































































































































Reviews:

No comments