manualshive.com logo in svg

Gigabyte 20-Bay, User Manual

Share
Download
Gigabyte 20-Bay User Manual Download Page 95

- 89 -

BIOS Setup

Parameter

Description

DRAM Memory Mapping

Press [Enter] for more options

 

Š

Chipselect Interleaving

 

– Interleave memory blocks across the DRAM chip slects for node 0

 

– Options available: Disabled/Auto. Default option is 

Auto

.

 

Š

BankGroupSwap

 

–

Configures the BankGroupSwap. BankGroupSwap (BGS) is a 

memory mapping option in AGESA that alters how applications get 
assigned to physical locations within the memory modules. When 
this option sets to Auto, it is null.

 

– Options available: Enabled/Disabled/Auto. Default option is 

Auto

.

 

Š

BankGroupSwapAlt

 

–

Configures the BankGroupSwapAlt.

 

– Options available: Enabled/Disabled/Auto. Default option is 

Auto

.

 

Š

Address Hash Bank

 

– Enable or disable bank address hashing.

 

– Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

 

Š

Address Hash CS

 

– Enable or disable CS address hashing.

 

– Options available: Auto/Enabled/Disabled. Default option is 

Auto

.

 

Š

Address Hash Rm

 

– Enable or disable RM address hashing.

 

– Options available: Auto/Enabled/Disabled. Default option is 

Auto

.

 

Š

SPD Read Optimization

 

– Enable or disable SPD Read Optimization. Enabled = SPD reads 

are skipped for Reserved fields and most of upper 256 Bytes, 

Disabled = read all 512 SPD Bytes.

 

– Options available: Auto/Enabled/Disabled. Default option is 

Auto

.

NVDIMM

Press [Enter] for more options.

Memory MBIST

Press [Enter] for more options

 

Š

MBIST Enable

 

– Enable or disable Memory MBIST.

 

– Options available: Disabled/Enabled. Default option is 

Disabled

.

 

Š

Data Eye

 

– Press [Enter] for more options.

Summary of Contents for 20-Bay





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands