manualshive.com logo in svg

Gigabyte 20-Bay, User Manual

Share
Download
Gigabyte 20-Bay User Manual Download Page 72

BIOS Setup

- 66 -

(Note1)   This section is dependent on the available PCIe Slot.
(Note2)   This section is dependent on the available LAN controller.

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

SLOT1_F / SLOT1_R / SLOT2_F / 
SLOT2_R / SLOT3 / OCP1 / OCP2 
Lanes

(Note1)

Change the PCIe lanes.
Options available:
Auto / x16 / x8 x8 / x8 x4 x4 / x4 x4 x8 / x4 x4 x4 x4 
(OCP2 Lanes only features Auto / x8 / x4 x4.)
Disabled. Default setting is 

Auto

.

SLOT1_F / SLOT1_R / SLOT2_F / 
SLOT2_R / SLOT3 / OCP1 / OCP2 I/O 
ROM

(Note1)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN Controller

(Note2)

Enable/Disable the onboard LAN devices.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN I/O ROM

(Note2) 

Enable/Disable the onboard LAN devices and initializes device 
expansion ROM.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is 

Enabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Summary of Contents for 20-Bay





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands