Warning!
- Beware of inexpert handling!
- Never leave the appliance on without water!
Ignition
Check that the water drain release is closed. Fill the bath
with water up to the level marked. Turn on the main switch
upstream of the appliance.
On the twin-bath models (SKB80E, TB80E and CBE8) both
baths can be used independently of each other at diffe-
rent temperatures, or one can be used without the other.
Turn the main switch on the appliance. It will light up indi-
cating that the appliance is on.
Switch on switch C (pages 3, 4, .5) and use knob A to po-
sition the thermostat on the desidered temperature,
between 30°C and 90°C inclusive; the pilot light will come
on; this means that the resistances are on. As soon as the
required temperature is reached, the pilot light will go off.
To turn the appliance off, simply turn the knob back to '0'
and switch off.
Emptying the bath
First of all a suitable bowl for emptying the water into
should be found.
Fit the drainage pipe as shown in the picture (2). Open the
oil drain tap.
Important
With Top models, make sure you respect the distance
between the appliance and the edge of the base.
CLEANING AND TAKING CARE OF THE
MACHINE
Warning!
Never clean the appliance with jets of water, whether
direct or pressurised.
Allow the machine to cool down before cleaning
Before starting to clean the appliance, disconnect from
the mains.
All steel parts should be washed in warm water, using a
neutral detergent, then rinsed thoroughly to eliminate any
residual detergent.
Dry using a dry cloth. Avoid using abrasive or corrosive
detergents which could damage the steel.
What to do if not using the appliance
for a long time
Thoroughly clean and dry the machine as described.
Disconnect the power supply.
What to do if something goes wrong
If anything goes wrong, immediately turn the appliance
off, then turn off the power supply at the switch located
upstream of the appliance, and call the aftersales depart-
ment.
MAINTENANCE
All maintenance should be carried out by qualified per-
sonnel only. Before carrying out any maintenance work,
unplug the appliance or turn off the switch upstream of the
appliance.
USING THE APPLIANCE
003-03 - Electric bain-marie
8
MAX 120 mm
2
