20190905
14
P0 = <0x30H: signal high, others, signal low>
P1= <0x30H: signal high, others, signal low>
P2= <0x30H: signal high, others, signal low>
7.Specifications
A.
Display:
122*32 graphics LCD without backlight
Number of characters: 32(16 columns * 2 lines)
12 Text-Messages & 6 Graphics-Massages
B.
Power consumption: 100mA@12VDC
C.
Network: Ethernet RJ45
8. FCC Statement
FCC (U. S. Federal Communications Commission)
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may Not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
