20190905
4
A.
Ethernet network
1)
Do
Wi-Fi setting by USB keyboard
step and switch to Wi-Fi disable
2)
Connect the cable (WAS-1499) to the RJ45 port of the hub.
3)
Plug in the DC power adaptor to the power jack on the
FAT820W.
4)
Plug the adaptor to the power line.
5)
Build connection with IP and Port shown at the screen.
B.
Wireless network – Station Mode
1)
Do
Wi-Fi setting by USB keyboard
step and switch to
Wi-Fi enable and then choose station mode
2)
Plug in the DC power adaptor to the power jack on the
FAT820W.
3)
Plug the adaptor to the power line.
4)
Waiting for connection of Wi-Fi
5)
Build connection with IP and Port shown at the screen.
C.
Wireless network – AP Mode(access point)
1)
Do
Wi-Fi setting by USB keyboard
step and switch to
Wi-Fi enable and then choose ap mode
2)
Plug in the DC power adaptor to the power jack on the
FAT820W.
3)
Plug the adaptor to the power line.
4)
Build connection with IP and Port shown at the screen.
Host should connect with AP( Fat820w)
HUB
Internet
HOST
FAT8XX
WAS1499
