GIGA-BYTE TECHNOLOGY Z590M GAMING X User Manual Download

Page: 35 / 48

IPv4 HTTP Support

Enables or disables HTTP boot support for IPv4. This item is configurable only when

Network Stack

enabled.

IPv6 PXE Support

Enables or disables IPv6 PXE Support. This item is configurable only when

Network Stack

is enabled.

IPv6 HTTP Support

Enables or disables HTTP boot support for IPv6. This item is configurable only when

Network Stack

enabled.

PXE boot wait time

Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is

configurable only when

Network Stack

is enabled. (Default: 0)

Media detect count

Allows you to set the number of times to check the presence of media. This item is configurable only when

Network Stack

is enabled. (Default: 1)

NVMe Configuration

Displays information on your M.2 NVME PCIe SSD if installed.

SATA And RST Configuration

SATA Controller(s)

Enables or disables the integrated SATA controllers. (Default: Enabled)

SATA Mode Selection

Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers

to AHCI mode.

Intel RST Premium With Intel Optane System Acceleration

Enables RAID for the SATA controller.

AHCI

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

Aggressive LPM Support

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset

SATA controllers. (Default: Disabled)

Port 0/1/2/3/4/5

Enables or disables each SATA port. (Default: Enabled)

SATA Port 0/1/2/3/4/5 DevSlp

Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)

Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

Configured as eSATA

Enables or disables support for external SATA devices.

Realtek PCIe 2.5GBE Family Controller

This sub-menu provides information on LAN configuration and related configuration options.

- 35 -

Summary of Contents for Z590M GAMING X

















































Search results

Summary of Contents for Z590M GAMING X

Reviews:

Related manuals for Z590M GAMING X

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY Z590M GAMING X, User Manual

Search results

Summary of Contents for Z590M GAMING X

Reviews:

Related manuals for Z590M GAMING X

Brands by name

Popular brands