GIGA-BYTE TECHNOLOGY MDH11BM Page 41 User Manual Download

Page: 41 / 51

- 41 -

BIOS Setup

2-3 Chipset Menu

VT-d

Enable/Disable VT-d function.

Options available: Enabled/Disabled. Default setting is

Enabled

DVMT Pre-Allocated

Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

Options available: 64M/128M/192M/256M/320M/384M/512M. Default setting is

32M

Onboard Audio

Enable/Disable onboard audio controller.

Options available: Enabled/Disabled. Default setting is

Enabled

Onboard LAN

Enable/Disable onboard LAN controller.

Options available: Enabled/Disabled. Default setting is

Enabled

ERP Lowest Power State Mode

Enable/Disable ERP Lowest Power State Mode.

Options available: Enabled/Disabled. Default setting is

Disabled

Restore AC Power Loss

This option provides user to set the mode of operation if an AC / power loss occurs.

Power On

: System power state when AC cord is re-plugged.

Power Off

: Do not power on system when AC power is back.

Last State

: Set system to the last sate when AC power is removed.

Options available: Power On/Power Off/Last State. Default setting is

Power Off

Summary of Contents for MDH11BM




















































Search results

Summary of Contents for MDH11BM

Reviews:

Related manuals for MDH11BM

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MDH11BM, User Manual

Search results

Summary of Contents for MDH11BM

Reviews:

Related manuals for MDH11BM

Brands by name

Popular brands