Hardware Installation
- 22 -
13) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status
indicator on the chassis to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis
front panel module to this header, make sure the wire assignments and the pin assignments are
matched correctly.
Pin No. Signal Name Definition
1
HD+
Hard Disk LED Signal anode (+)
2
MPD+
Power LED Signal anode (+)
3
HD-
Hard Disk LED Signal cathode(-)
4
MPD-
Power LED Signal cathode(-)
5
GND Ground
6
PW+
Power Button anode (+)
7
-RST
Reset Button
8
PW-
Power Button cathode(-)
9
NC
No connect
10
NC
No Pin
2
1
10
9
Summary of Contents for MDH11BM
