GIGA-BYTE TECHNOLOGY MD50-LS0 Page 91 User Manual Download

Page: 91 / 124

BIOS Setup

- 91 -

When SATA Type is set to RAID Mode

SATA LED locate

When this option is enabled, LED/SGPIO hardware is attached.

Options available: Enabled/Disabled. Default setting is

Enabled

Intel Rapid Recovery Technology

Enable/Disable Intel Rapid Recovery Technology support function.

Options available: Enabled/Disabled. Default setting is

Enabled

RAID Option ROM UI banner

Options available: Enabled/Disabled. Default setting is

Enabled

IRRT Only on ESATA

Options available: Enabled/Disabled. Default setting is

Enabled

Smart Response Technology

Enable/Disable Intel Smart Response Technology support function.

Options available: Enabled/Disabled. Default setting is

Enabled

RAID OROM prompt delay

Options available: 2 Seconds/4 Seconds/6 Seconds/8 Seconds. Default setting is

2 Seconds

Summary of Contents for MD50-LS0





























































































































Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MD50-LS0, User Manual

Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands