GIGA-BYTE TECHNOLOGY MD50-LS0, User Manual

Page: 34 / 124

Hardware Installation - 34 -
3) SATA_DOM1 (SATA port 1 DOM Jumper)
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No. Definition
1 P5V
2 SATA1 Pin7
3 GND
1
4) BIOS_PWD (Clearing Supervisor Password Jumper)
2-3 Close: Skip supervisor password.
1-2 Close: Normal operation. (Default setting)
1
1