GIGA-BYTE TECHNOLOGY MD50-LS0 Page 56 User Manual Download

Page: 56 / 124

BIOS Setup

- 56 -

2-2-7 USB Configuration

(Note) This item is present only if you attach USB types of device.

USB Configuration

USB Devices:

Display the USB devices connected to the system.

XHCI Hand-off

Enable/Disable XHCI (USB 3.0) Hand-off support.

Options available: Enabled/Disabled. Default setting is

Enabled

EHCI Hand-off

Enable/Disable EHCI (USB 2.0) Hand-off function.

Options available: Enabled/Disabled. Default setting is

Disabled

USB Mass Storage Driver Support

(Note)

Enable/Disable USB Mass Storage Driver Support.

Options available: Enabled/Disabled. Default setting is

Enabled

Port 60/64 Emulation

Enable I/O port 60h/64h emulation support. This should be enabled for the complete USB Keyboard
Legacy support for non-USB aware OS.

Options available: Enabled/Disabled. Default setting is

Enabled

Summary of Contents for MD50-LS0





























































































































Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MD50-LS0, User Manual

Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands