GIGA-BYTE TECHNOLOGY MD50-LS0 User Manual Download Page 52

Page: 52 / 124

BIOS Setup

- 52 -

2-2-4 CSM Configuration

Compatibility Support Module Configuration

CSM Support

Enable/Disable Compatibility Support Module (CSM) support.

Options available: Enabled/Disabled. Default setting is

Enabled

CSM16 Module Version

Display CSM Module version information.

Gate20 Active

Upon Request: GA20 can be disabled using BIOS services.

Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.

Options available: Upon Request/Always. Default setting is

Upon Request

Option ROM Messages

Option ROM Messages.

Options available: Force BIOS/Keep Current. Default setting is

Force BIOS

INT19 Endless Retry

Enabled: Allowed headless retry boot

Options available: Enabled/Disabled. Default setting is

Enabled

Boot option filter

Determines which devices system will boot to.

Options available: UEFI and Legacy/Legacy only/UEFI only. Default setting is

UEFI and Legacy

Summary of Contents for MD50-LS0





























































































































Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MD50-LS0, User Manual

Search results

Summary of Contents for MD50-LS0

Reviews:

Related manuals for MD50-LS0

Brands by name

Popular brands