GIGA-BYTE TECHNOLOGY H270-F4G Service Manual Download Page 55

Page: 55 / 125

- 55 -

BIOS Setup

Legacy OS Redirection Resolution

(Note)

On Legacy OS, the number of Rows and Columns supported redirection.

Options available: 80x24/80X25. Default setting is

80x24

Putty KeyPad

(Note)

Select function FunctionKey and KeyPad on Putty.

Options available: VT100/LINUX/XTERMR6/SCO/ESCN/VT400. Default setting is

VT100

Redirection After BIOS POST

(Note)

This option allows user to enable console redirection after O.S has loaded.

Options available: Always Enable/Boot Loader. Default setting is

Always Enable

Out-of-Bnad Mgmt Port

Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows
Server OS through a serial port.

Options available: COM1/COM2. Default setting is

COM1

(Note) Advanced items prompt when this item is defined.

Summary of Contents for H270-F4G






























































































































Search results

Summary of Contents for H270-F4G

Reviews:

Related manuals for H270-F4G

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY H270-F4G, Service Manual

Search results

Summary of Contents for H270-F4G

Reviews:

Related manuals for H270-F4G

Brands by name

Popular brands