GIGA-BYTE TECHNOLOGY H270-F4G Service Manual Download Page 47

Page: 47 / 125

- 47 -

BIOS Setup



Main

This setup page includes all the items in standard compatible BIOS.



Advanced

This setup page includes all the items of AMI BIOS special enhanced features.

(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)



Intel RC Setup

This setup page includes all the submenu options for configuring the function of processor, network,

North Bridge, South Bridge, and System event logs.



Server Management

Server additional features enabled/disabled setup menus.



Security

Change, set, or disable supervisor and user password. Configuration supervisor password allows you to

restrict access to the system and BIOS Setup.

A supervisor password allows you to make changes in BIOS Setup.

A user password only allows you to view the BIOS settings but not to make changes.



Boot

This setup page provides items for configuration of boot sequence.



Exit

Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing
<F10> can also carry out this task.)

Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation
message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)

Summary of Contents for H270-F4G






























































































































Search results

Summary of Contents for H270-F4G

Reviews:

Related manuals for H270-F4G

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY H270-F4G, Service Manual

Search results

Summary of Contents for H270-F4G

Reviews:

Related manuals for H270-F4G

Brands by name

Popular brands