GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R User Manual Download Page 50

Page: 50 / 72

- 50 -

Socket0 Configuration

Press [Enter] for configuration of advanced items.

Socket1 Configuration

Press [Enter] for configuration of advanced items.

IOAT Configuration

The sub-menu provides options enable or disable the IIO IOAPIC Stacks 0~5.

Disable TPH

Enables or disables TLP Processing Hint disable.

Prioritize TPH

Enables or disables Prioritize TLP.

Relaxed Ordering

Enables or disables Relaxed Ordering.

Intel

VT for Directed I/O (VT-d)

Enables or disables Intel

Virtualization Technology for Directed I/O.

Intel

VMD technology

Enables or disables Intel

Volume Management Device (Intel

VMD) technology.

PCI-E Completion Timeout (Global) Disable

Enables or disables the Completion Timeout (D:x F:00:B8h B:4) where x is 0-3.

PCIe Max Read Request Size

Sets Max Read Request Size in EndPoints.

Advanced Power Management Configuration

The sub-menu displays and provides options to change the power management settings.

CPU P State Control

SpeedStep (Pstates)

Enables or disables EIST (P-States).

EIST PSD Function

Chooses HW_ALL/SW_ALL/SW_ANY in PSD return.

Turbo Mode

Enables or disables processor Turbo Mode (requires EMTTM enabled too).

Hardware PM State Control

Hardware P-States

Disable

Hardware chooses a P-State based on OS request (Legacy P-States).

Native Mode

Hardware chooses a P-State based on OS guidance.

Out of Band Mode Hardware autonomously chooses a P-State (no OS guidance).

Native Mode with No Legacy Support Native mode with no support for older hardware.

CPU C State Control

Autonomous Core C-State

Enables or disables Autonomous Core C-State Control.

CPU C6 report

Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt.

Auto

lets the BIOS automatically

configure this setting.

Enhanced Halt State (C1E)

Enables or disables Intel

CPU Enhanced Halt (C1E) function, a CPU power-saving function in system

halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to

decrease power consumption.

Summary of Contents for GIGABYTE GS-S12-P04R









































































Search results

Summary of Contents for GIGABYTE GS-S12-P04R

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R, User Manual

Search results

Summary of Contents for GIGABYTE GS-S12-P04R

Reviews:

Brands by name

Popular brands