GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R, User Manual

Page: 24 / 72

4-5 Installing the Hard Drive
Follow these instructions to install the hard drive:
1. Unlock and open the chassis cover.
2. Press the release button to extend the drive carrier handle. Press the release button to extend the drive
carrier handle.
3. Remove the screws holding the dummy drive to the drive carrier.
4. Place a hard drive in the drive carrier.
5. Secure the hard drive to the carrier using four screws.
6. Insert the hard drive into the chassis.
Read the following guidelines before you begin to install the hard drive:
• Take note of the drive tray orientation before sliding it out.
•
The tray will not fit back into the bay if inserted incorrectly.
•
Make sure that the hard drive is connected to the hard drive connector on the backplane.
C C
1
C
C
2
4
3
5
- 24 -