GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R, User Manual

Page: 22 / 72

4-4 Installing the PCI Express Card
Follow these instructions to install a PCI express card:
1. Remove the screws and then loosen the latch on the graphics card holder to remove the graphics card
holder. (Refer to numbers 1~4 below)
2. Pull the latch of the case upwards and remove the screws; and then remove the metal slot cover of the
expansion slot. (Refer to numbers 5~7 below)
•
Voltages can be present within the server whenever an AC power source is connected. This voltage
is present even when the main power switch is in the off position. Ensure that the system is powered-
down and all power sources have been disconnected from the server prior to installing a PCI card.
•
Failure to observe these warnings could result in personal injury or damage to equipment.
•
The PCI riser assembly does not include a riser card or any cabling as standard. To install a PCI
card, a riser card must be installed.
Remove graphics card holder
1
2
3
4
5
6
7
- 22 -