GIGA-BYTE TECHNOLOGY GA-X99-Phoenix SLI User Manual Download

Page: 60 / 128

BIOS Setup

- 60 -

Platform Power Management

Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)

PEG ASPM

Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is

configurable only when

Platform Power Management

is set to

Enabled

. (Default: Enabled)

PCH ASPM

Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item

is configurable only when

Platform Power Management

is set to

Enabled

. (Default: Enabled)

DMI ASPM

Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is

configurable only when

Platform Power Management

is set to

Enabled

. (Default: Enabled)

AC BACK

Determines the state of the system after the return of power from an AC power loss.

Always Off

The system stays off upon the return of the AC power. (Default)

Always On

The system is turned on upon the return of the AC power.

Memory

The system returns to its last known awake state upon the return of the AC power.

Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled

Disables this function. (Default)

Any Key

Press any key to turn on the system.

Keyboard 98

Press POWER button on the Windows 98 keyboard to turn on the system.

Password

Set a password with 1~5 characters to turn on the system.

2-8 Power

Summary of Contents for GA-X99-Phoenix SLI

































































































































Search results

Summary of Contents for GA-X99-Phoenix SLI

Reviews:

Related manuals for GA-X99-Phoenix SLI

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-X99-Phoenix SLI, User Manual

Search results

Summary of Contents for GA-X99-Phoenix SLI

Reviews:

Related manuals for GA-X99-Phoenix SLI

Brands by name

Popular brands