BIOS Setup
- 42 -
(Note 1) This item is present only when you install a CPU that supports this feature. For more information about
Intel
®
CPUs' unique features, please visit Intel's website.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
&
C3 State Support
(Note 1)
Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the
CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.
The C3 state is a more enhanced power-saving state than C1.
Auto
lets the BIOS automatically configure
this setting. (Default: Auto)
&
C6/C7 State Support
(Note 1)
Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the
CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.
The C6/C7 state is a more enhanced power-saving state than C3.
Auto
lets the BIOS automatically configure
this setting. (Default: Auto)
&
CPU Thermal Monitor
(Note 1)
Enables or disables Intel
®
Thermal Monitor function, a CPU overheating protection function. When enabled,
the CPU core frequency and voltage will be reduced when the CPU is overheated.
Auto
lets the BIOS
automatically configure this setting. (Default: Auto)
&
CPU EIST Function
(Note 1)
Enables or disables Enhanced Intel
®
Speed Step Technology (EIST). Depending on CPU loading, Intel
®
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production.
Auto
lets the BIOS automatically configure this setting.
(Default: Auto)
&
Extreme Memory Profile (X.M.P.)
(Note 2)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled
Disables this function. (Default)
Profile1
Uses Profile 1 settings.
Profile2
(Note 2)
Uses Profile 2 settings.
&
System Memory Multiplier
Allows you to set the system memory multiplier.
Auto
sets memory multiplier according to memory SPD
data. (Default: Auto)
&
Memory Frequency (MHz)
The first memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the
System Memory Multiplier
settings.
Summary of Contents for GA-X99-Phoenix SLI
Page 8: ... 8 ...
Page 126: ...Appendix 126 ...
